7/1/08
PF Coupe Exhaust, and Cal Spyder Gastank
Since the exhaust on the PF Coupe was checked and fitted to the car, we
can now paint it and ready it for final assembly. If we had painted it
earlier we would have spent the same amount of time touching up the
scratches.
Last week I was asking about the tabs below the rockers on the PF
Coupe. Several owners responded and told me that they were mounting
tabs for a trim strip that is supposed to cover the pinch weld at the
bottom of the rocker. My 330 America has a similar one, but the reason
I didn't think of this is because several of these tabs were missing on
this car. This car will
have to go without these for now until the owner either finds one or
leaves it as a project for the next owner.
This brings us to a very interesting topic of bill-able hours. Kerry
Chesbro and I were talking about the difference between working on our
own cars and working on a customer's car. If my car were missing these
tabs and trim strip, I would be hand fabricating the pieces and
welding on new tabs, but when I'm being paid by the hour to work on
these cars, the customer might not want to pay for the several hours of
work to fabricate, weld, and paint these trim pieces. The time it takes
to collect all the hardware and fasteners is often not even factored
into the total cost of the repair. Finding a customer who really
understands how much time it takes to do it right is not easy, but we
also try very hard not to spend too much time on something to keep
costs under control.
Another project I've been working on is getting a gas tank fabricated
for the California Spyder we have at the shop. The original tank was
pretty rusty and after a cleaning and sandblasting, we found a lot of
rust and large patch on the bottom of the tank.
The whole bottom half of the tank was pretty thin with the patch
falling out, so repairing this original tank was becoming a loosing
battle. The best thing was to have a new one made from scratch.
François gave me the task of finding a competent shop to handle
the
fabrication, and I got bids from several shops. Although this was not a
Concours restoration, we wanted a reasonable facsimile of the original
tank, but did not want to spend $$$ for an absolute reproduction. The
original tank was riveted together and sealed with lead solder at the
seams, but reproducing these details for a car that is not headed for
Pebble Beach seemed like a waste of money. Besides, under black paint,
and undercoating, I wonder how many judges could spot the difference?
I was highly recommended a fabricator who had made a tank for another
shop, and I decided to give him the job. John took the fittings off the
old tank and welded them onto the new tank and sent back a beautiful
copy of the old tank!
The baffles inside and all the dimensions were copied exactly. A
thicker gauge of steel was used for the reproduction, so this tank will
probably outlast another 50 years in this car.
The mounting tabs were
intentionally left off so we can weld them in place to make a perfect
fit to the frame rail
of the car. After it's fitted, we'll send the tank out for sealing to
insure the tank remains leak free for years to come, paint it black,
and mount it in place. It's always a shame to have such craftsmanship
hidden up under the car for no one to see!
Just a reminder, I'm looking for a
new Vintage Ferrari Project. If you have, or know of a restoration
project, please let me know. It would be great to restore another car
on this website! My E-mail.
Previous
Restoration Day
Next
Restoration Day
Home page