Dear Denmark-330-owner,
I ordered the 32x65x25 7 years ago at Peters Bearings Germany. Not cheap but availible. Company still in business.
Regards from Germany
Search found 91 matches
- Mon Oct 05, 2020 5:15 pm
- Forum: Vintage Ferraris
- Topic: more bearings problems
- Replies: 4
- Views: 3836
- Sat Feb 15, 2020 4:50 pm
- Forum: Vintage Ferraris
- Topic: Dash restoration
- Replies: 8
- Views: 8475
Re: Dash restoration
]Sorry again, the preview of the post shows 5 pics, but when i submit only the first one appears. All pics already in low resolution. Problem solved. I had to place them inline.
- Sat Feb 15, 2020 4:39 pm
- Forum: Vintage Ferraris
- Topic: Dash restoration
- Replies: 8
- Views: 8475
Re: Dash restoration
Sorry I intended to send more pics
- Sat Feb 15, 2020 4:35 pm
- Forum: Vintage Ferraris
- Topic: Dash restoration
- Replies: 8
- Views: 8475
Re: Dash restoration
Here my pics from the dashboard . Left side around the switches there is a plastic cover . Around the steering column it is a fiberglass form piece covered with vynil like the right side of the dash.
- Fri Feb 14, 2020 5:18 pm
- Forum: Vintage Ferraris
- Topic: Dash restoration
- Replies: 8
- Views: 8475
Re: Dash restoration
Hello Pierre, I have also a series 2 330 in very original condition. I can help you with pics for your dash area. In my opinion the wood varneer is mahagoni no teak. Teak is much darker. The verneer originally is laquered. If you oil it you can not paint it any more. Tomorrow I will take pics. Dieter
- Mon Dec 18, 2017 6:10 pm
- Forum: Vintage Ferraris
- Topic: Sheet metal screws through firewall and footwell. Correct?
- Replies: 9
- Views: 10186
Re: Sheet metal screws through firewall and footwell. Correct?
May be now pic in better size
- Mon Dec 18, 2017 5:59 pm
- Forum: Vintage Ferraris
- Topic: Sheet metal screws through firewall and footwell. Correct?
- Replies: 9
- Views: 10186
Re: Sheet metal screws through firewall and footwell. Correct?
The backlayered metal strips you find as I remember only for the mud shields inside the fenders. It is tapped M5. See pic
- Wed Feb 08, 2017 4:21 pm
- Forum: Vintage Ferraris
- Topic: 365GTC headlight rings
- Replies: 8
- Views: 9509
Re: 365GTC headlight rings
Hi Maarten,
I put off the ring and took the caliper for dimensions. Here is my quick drawing about the details. I hope it helps.
Good luck
Dieter
I put off the ring and took the caliper for dimensions. Here is my quick drawing about the details. I hope it helps.
Good luck
Dieter
- Mon Feb 06, 2017 4:16 pm
- Forum: Vintage Ferraris
- Topic: Unknown Bracket
- Replies: 12
- Views: 13607
Re: Unknown Bracket
Hello Daytonaman,
here is a pic of my choke lever location. It is hidden under the dash board, driver side (LH).
Dieter
here is a pic of my choke lever location. It is hidden under the dash board, driver side (LH).
Dieter
- Mon Feb 06, 2017 3:17 am
- Forum: Vintage Ferraris
- Topic: Unknown Bracket
- Replies: 12
- Views: 13607
Re: Unknown Bracket
My car is also a later Series 2. So it matches exactly.
- Sun Feb 05, 2017 1:55 pm
- Forum: Vintage Ferraris
- Topic: 365GTC headlight rings
- Replies: 8
- Views: 9509
Re: 365GTC headlight rings
Hi Maarten,
just for clarification. I assume you need the dimensions for the outer chrome rings, not for the inner ones like on the pics from mine and your headlights. Please let me know.
Dieter
just for clarification. I assume you need the dimensions for the outer chrome rings, not for the inner ones like on the pics from mine and your headlights. Please let me know.
Dieter
- Sun Feb 05, 2017 5:03 am
- Forum: Vintage Ferraris
- Topic: Unknown Bracket
- Replies: 12
- Views: 13607
Re: Unknown Bracket
Thanks a lot! A pic says more than 1000 words. Now I know what to fabricate assuming this piece is unabtainable.
Dieter
Dieter
- Sat Feb 04, 2017 4:36 pm
- Forum: Vintage Ferraris
- Topic: Unknown Bracket
- Replies: 12
- Views: 13607
Re: Unknown Bracket
My 330 2+2 has a choke for the Weber DCZ. I miss the choke cable bracket. the choke cable was just fastened with a cable strap at the accelerator cable bracket. Does anybody have a pic how the original bracket and cable assembly looks like. The one here in this post seems to be not suitable for a 33...
- Mon Jan 30, 2017 4:57 pm
- Forum: Vintage Ferraris
- Topic: 365GTC headlight rings
- Replies: 8
- Views: 9509
Re: 365GTC headlight rings
Hi Maarten,
from first sight it looks like the GTC 365 uses the same headlights and chrome rim like late 330 2+2. In my GT 330 2+2 (1966) Carello 07.480.800 are installed. If you have similar Carellos the chrome rim will be also the same. If so I can give you the dimensions.
Dieter
from first sight it looks like the GTC 365 uses the same headlights and chrome rim like late 330 2+2. In my GT 330 2+2 (1966) Carello 07.480.800 are installed. If you have similar Carellos the chrome rim will be also the same. If so I can give you the dimensions.
Dieter
- Sun Dec 25, 2016 3:10 pm
- Forum: Vintage Ferraris
- Topic: 330 GTC Horn Motor Cover
- Replies: 6
- Views: 6971
Re: 330 GTC Horn Motor Cover
Hi Ed, My GT330 #8741 also had the horn compressor cover made of white plastic but painted black. Right now it is out. So when you need detailed dimensions let me know. Here another pic from this forum. But I wonder why they covered the horn compressor with this plastic cup not giving any more acces...