www.tomyang.net

Ed, will be difficult to find org. ones.

but were used on Alfa guilietta ,Lancia Appia Lancia Flaminia, Aurelia etc

the rubber replica´s comes without text.

they schould have metalinserts in the fixation holes

mine are all oversprayed with paint.....

good hunting

C.

ebayjune 034.JPG Steve ,(SLM) this is an interesting problem I would like to know how this can happen (diagnose). that bring us further here. I don´t drive cars with a propshaft like you'res but had some cars with this systems 250gt OD gearboxes mine have the sliding mechanism at the end of the 4-s...

C.

C.

I am not a fan of FC. But read a question about wood jigs of F-cars who were produced on the org wooden bucks I did found those already in the early 90th near Turin . But was visiting this company 2 years ago again, and made some pics, these were ALL bought at Scaglietti. and are a kind of art on th...

Steve, I went through this several times. and at the end i did it over and over again wrong. When a RA was singing i tried it first with thicker oil. then when no success , i exchange the outside bearing by pulling out the 2 schafts no success. You can pull out the centre R,I.V bearing but difficult...

Dyke, In Germany you can fixate the fuelpistel at the tank station. when you fill up slow or quick you produce a gas cloud this goes up. this let the fuel pistol stop and would be the signal the tank is full. after the fuel is stabilize in he tank, you can fill up further. this" bypass" should shoul...

Edward 96GTS wrote:is putting in a racing style bladder an option?

Baffle plates in an orginal tank will prevent this Edward, I think.

best

C.

P.S
What about that"useless" bypass item ?

Thanks Dyke and Timo for the prof. advice, that will be the safest way. I do use an 250GT with an new 155 liter handmade alu tank. this was leaking aftar two years.(vibrations) they AL- welded it completely around and checked t it with an red penetrating fluid-see pics- and sealed it from the inside...

thank you both ,Tim & Peter
I was fixated on the oval model which was in.

C.

I am searchung for weeks to find an air filter for a" low" cold air box. no succes at the usual suspects Filter which can be found on 3 carb. cars like : 250 GT 275 GTB 275 330 GTS, GTC etc oval or three separate. here the max inside dimensions : Form/shape oval or three seperate filters height 5,4 ...

Thanks Peter, That are tips when you use it on the outside(brush) If my englisch is good enough. I would like to use it for the inside of each tank. Mainly to reseal the inside ,and to close little pittholes which cannot be seen. Is this stuff compatible with the new fuels on the market with lots of...

two pics more

C.

Working on two PF-coupe fuel tanks serie 1 &2 1958 and 1960 bought in the US the 2x cleaning set POR15. somebody already used this ? is there any negative info around this product ? Tanks are a bit rusty in side, and maybe little pittholes occur. Laying around since the mid 90th in my trash. thanks ...

Since we're on the topic of the metal ring, I'd like to survey what finish it should be, Black oxide, or white cad? Francois is under the opinion that it's black oxide, but I've seen restored cars with them finished in white cad. Cornelis, do you have any unrestored ones in your parts stash? FYI, a...