www.tomyang.net

Attached is a photo of the installation of a Masterlube preoiler installed on my Lusso motor on its storage stand. It's waiting for me to finish the rest of my restoration to be installed. Since my progress is somewhere between glacial and geological, I want to turn it over for a few seconds every m...

One of the first things I did on my Lusso was overhaul the steering box. It leaked furiously, as the seals had acquired the consistency of the plastic that was used to make the old telephone handsets, and it had a lot of play around center. It's a worm and pin design, which can wear. It's pretty ted...

My Lusso had the same problem when I bought it. It wouldn't run AT ALL with the electric pump turned off. It's really simple to remove the mechanical fuel pump - just 2 nuts, 14 mm as I recollect. There's a linkage that transmits the motion of the pushrod from the motor to the diaphragm that consist...

I'm looking for a way to correct the sagging front suspension on my (dato'd looking) Lusso. Does anybody have any experience with either having front coils stretched and retempered or new coils wound?

John Tarr

Does anybody have any leads on rebuild kits or other parts sources for the Bendix Hydrovac brake booster installed on Lusso's

I'm shopping for a new windshield washer bag and pump for my Lusso #4437. Could anybody advise me about the the proper types?

If you decide to take a southerly route through the Colorado Rockies (which I strongly recommend), Mike's Performance Headquarters in Englewood (suburb of Denver) is an excellent resource for maintenance and repairs. He's been the travelling mechanic for the Colorado Grand, and has vast experience w...

After being stranded on the road with a dead electrical system in my Lusso a couple of summers ago, I COMPLETELY redid my wiring harness. I removed the entire harness, stripped off all the loom, traced, inspected, continuity tested, soldered new terminals with 2 layers of heat shrink tubing for stra...

I ran into a similar problem the first time I went thru the doors on my Lusso. One of the pulleys was bolted thru a slotted hole that allowed it to be slid up or down to tension the cable.
Hope this helps.