Search found 157 matches
- Fri Mar 08, 2024 4:47 am
- Forum: Vintage Ferraris
- Topic: Securing plate for droop stop rubber
- Replies: 10
- Views: 6005
Securing plate for droop stop rubber
Hi, the 330 catalog shows 2 items on Tavola 29 (parts 46 and 47) that obviously shall secure the rubber droop stop at the front suspension - please see picture. Does anybody ever have seen these 2 items or in best case have dimensions and a picture of these? I do have a 250 GTE and miss these. I sup...
- Wed Dec 13, 2023 4:57 pm
- Forum: Vintage Ferraris
- Topic: Coil oil fill-up
- Replies: 4
- Views: 4577
Re: Coil oil fill-up
Thank you very much!
- Tue Dec 12, 2023 3:13 pm
- Forum: Vintage Ferraris
- Topic: Coil oil fill-up
- Replies: 4
- Views: 4577
Re: Coil oil fill-up
Hello John, thank you for this information. I only thought about the heat transfer, but you are right of course,the lifespan of the paper is affected by the oil. I have organized mineral transformer oil Nytro T 4000X. The question is if the mixing with the old oil inside of the coil will have any ne...
- Mon Dec 11, 2023 5:59 am
- Forum: Vintage Ferraris
- Topic: Coil oil fill-up
- Replies: 4
- Views: 4577
Coil oil fill-up
I have the red Magneti Marelli 12V BZR 201A coils in my 250 GTE and one of these seems to miss oil. I want to fill-up and have two questions: a) which oil shall I use and b) to what level shall I fill-up? I read that these coils might have been filled with PCB which due to its toxic attitude is not ...
- Fri Nov 10, 2023 10:57 am
- Forum: Vintage Ferraris
- Topic: hose question
- Replies: 1
- Views: 3492
hose question
Does anybody know whether such type of black ribbed hose was ever used by the factory for a 250 engine? My assumption is that this was retrofitted throughout the centuries and is not original. The clamps used when I bought the car were not Cheneys which would underline this assumption, but I am not ...
- Thu Sep 14, 2023 11:51 am
- Forum: Vintage Ferraris
- Topic: Ptoblems with seals for front and rear screens
- Replies: 5
- Views: 7434
Re: Problems with seals for front and rear screens
i organised a piece of this seal from Cicognani to provide a sectional view. It is definitely the make of the rubber seal that prevents a proper fit. I modified the pic a little to give better visibility - the trim does not hook into the rubber deep enough. Does anybody have a recommendation for a s...
- Thu Sep 14, 2023 8:18 am
- Forum: Vintage Ferraris
- Topic: Crepaldi dealer sticker
- Replies: 2
- Views: 5099
Re: Crepaldi dealer sticker
This was exactly what I was looking for, thank you very much.
- Thu Sep 14, 2023 8:16 am
- Forum: Vintage Ferraris
- Topic: Battery frame
- Replies: 3
- Views: 6325
Re: Battery frame
Thank you very much Kerry!
- Wed Sep 13, 2023 12:38 pm
- Forum: Vintage Ferraris
- Topic: Crepaldi dealer sticker
- Replies: 2
- Views: 5099
Crepaldi dealer sticker
My car was sold through the Italian dealer Crepaldi to the first owner. I will reproduce the dealer sticker to attach it to the rear screen as shown in the picture. Does anybody have a better pic from this sticker to reproduce the correct typing? I reproduced several decals/stamps for the GTE in the...
- Wed Sep 13, 2023 12:05 pm
- Forum: Vintage Ferraris
- Topic: Battery frame
- Replies: 3
- Views: 6325
Battery frame
The top frame to hold the battery down is missing in my car. The bottom frame seems original and indicates to welcome the correct group 27 size battery (see pics). As to what I learned from older threads in this forum the top frame is of other/smaller dimensions than the bottom frame. Can anybody ad...
- Sun Sep 03, 2023 7:53 am
- Forum: Vintage Ferraris
- Topic: Ptoblems with seals for front and rear screens
- Replies: 5
- Views: 7434
Re: Ptoblems with seals for front and rear screens
Thank you very much for sharing your thoughts and expertise! We will try installing the seal again based on your hint.
Regards, Martin
Regards, Martin
- Thu Aug 31, 2023 12:55 am
- Forum: Vintage Ferraris
- Topic: Ptoblems with seals for front and rear screens
- Replies: 5
- Views: 7434
Ptoblems with seals for front and rear screens
I have problems with the fit of the rubber seals for the front and rear screens. The rubber is not shaped correctly so that there is a gap between the chrome trim and the seal. The chrome trim is in correct shape, it is definitely the rubber that caises the problem. I bought the seals from Cicognani...
- Sun Aug 06, 2023 8:38 am
- Forum: Vintage Ferraris
- Topic: Rear axle drop stop
- Replies: 8
- Views: 9740
Re: Rear axle drop stop
I received the replacement rope with 5mm and it is too thick. Seems that the original zinc plated metal rope for the drop stop of the rear axle is of dimension 4,5 mm 7x19 and not 5mm as described initially.
- Sat Jul 29, 2023 12:32 pm
- Forum: Vintage Ferraris
- Topic: Rear axle drop stop
- Replies: 8
- Views: 9740
Rear axle drop stop
I am happy to provide this information, maybe it saves someone's time in future: the zinc plated metal rope for the drop stop of the rear axle is of dimension 5mm 7x19.
- Sat Jul 22, 2023 6:04 am
- Forum: Vintage Ferraris
- Topic: 250 GTE Windshield Washer "Pump"
- Replies: 1
- Views: 4555
Re: 250 GTE Windshield Washer "Pump"
If you are willing to accept a little different way to mount the pump you might use the one from Lada 2103 or Polski Fiat. Google this:
Ablakmosó pumpa Lada 2103, polski fiat 125p
Best regards, Martin
Ablakmosó pumpa Lada 2103, polski fiat 125p
Best regards, Martin