www.tomyang.net

I am looking for an original hub puller tool for the tool kit of my 250 GTE. If you have one for sale please pm me. No replicas please.

Best regards,

Martin

I am looking for literature before starting the assembly process of my GTE. Can anybody provide an electronical file (pdf?) of these two books: a) "Ferrari Tuning Tips and Maintainance Techniques" by John Apen b) "Ferrari Guide to performance - essential tune-up secrets for Ferraris through the earl...

Does anybody know a source where to get a good replacement for the lower rocker panel / sill trim? It is made from alloy and fixed with hidden screws that slide in a rail on the underside. A replacement from stainless steel would also be acceptable as this trim is finished in black semi mat varnish.

Hello Dave,

thank you for your beneficiual pictures. I have sent you a pm but could not attach pictures, so I post these here.

Best regards, Martin

Hello, the bottom of my glove box has been replaced with card board and I need to recreate it from alloy as it was originally. Can anybody send pictures please which show how it should look like - especially at the edges? And was it covered with trim on the underside or shall it be left raw alloy th...

Hello, the screws at my doors (see picture / screws 16 - 20) seem to be chromed. The same type of screws are used at other positions than the 2 doors and are cadmium plated there. The question is whether these visible screws at the doors have been chromed originally from the factory or if one pre-ow...

Hello Tom and thank you for the helpful picture/information.

Best regards, Martin

Does anybody know whether the screws for trunk lid, engine hood and fuel filler flap are originally covered with the paint from the paint job or are these black oxide? My assumption is that the engine hood was removed from the Ferrari factory after receiving the body from Pininfarina for better acce...

Yes this is most likely factory fitted. This red hose shows spatters of black undercoating and looks 1960‘s throughout. It would be helpful if others with knowingly original GTEs could inform about their red hoses.

Does anybody know a source where to get the red rubber hose that protects the fuel hose from the tank to the filter?

…and for the other side.

Hello Chris,

can‘t particularly answer your questions, but mine from a series II GTE (#3631) look different in size and shape for both, front and rear bumpers. See pictures attached. I am looking to either restore these ore find some in better condition for a reasonable price.

Best regards,

Martin

Thank you very much for your help Kerry.

I am to produce concours correct battery cables and these pictures certainly would help. Unfortunately I cannot open these despite being logged in. Can anybody help? What do I have to do to make these pics visible?

Thanks and best regards,

Martin

I found the solution in an Alfa forum as these cars also used Becme fan motors. The second stamp shows the date of production! In case of my car 4 for April makes sense according to the production date of #3631 and the missing 2 digits obviously are 62. When looking thoroughly at my fan housing you ...