www.tomyang.net

Matt - congrats on the car - it looks great.....

:D

For a reference - each of the 330 panels on my car are 3 9/16 height and 38 11/16 width. This is currently being verified by another 330 car to see if they are all the same.

Let me know if anyone wants some pics with specs on the notches?

Yale, I did at one time look at the kenlowe fans - - can u tell me the model of the one you got and is it installed on the front (Grill side) of the radiator or on the engine side? Did you have to do any mods......did you have to install a new temp switch and fan relay switch? Sorry for all the ques...

Thanks Jack for the lead...very interesting info here!!

Ed

OK guys - - I have taken about 10 pics of my 330 GT panels and have marked on the back of one of the panels all the demension. Fundamenatlly the L&R are exactly the same. Each notch is about 1/2 wide and 1/8th deep. Spacing between notches slightly varies as the pictures show. Now - considering ther...

OK will do - -

Ed

OK me too! I'll get a picture and post it and update the profile accordingly...thanks for the reminder!!

Ed Montini
330 GT 8289

Paul Leonard is my guy i was referring to that has the contracts to cut the panels. I have seen the pictures of his installed on his door panels and they do look great. He also recommends that considering as stated above, one template may not be good to use to make all of them, as there may be some ...

Tom, great news.........and the picture looks like to be a great match......... I contacted my guy to get the info on the company that did the cutting..........they do a laser cut matched to the old piece. I left him a message a few min ago and will update the site as soon as i hear from him. enio45...

Has anyone purchased a set of the "Car Dolly's" or other manufactures of these? I'm in the market to buy 4 and wanted to hear from the group if anyone has a set, how do they like them, usability, move-ability - caster choice etc, alum or steel? I appreciate any advise..........thanks again Tommy for...

Your welcome....gald to help....mine were good so i disassembled them and had them rechromed - look great!!

Jack, have you tried Fred Petrosky - he advertises in hemmings - seems to have several 330 cars for parts??

Ed

JR........are you talking about the chrome exterior rocker moldings right below the doors? :?:

Ed

I can use a set of these also for my 330 2+2.....how many do we have so far.......if we get a large enought amount, i know a guy in Orlando that had them cut with a laser to duplicate the originals!! :)

Tom, thanks alot for the advise, ill check again on the initial and ongoing amps....i have a 330 GT 2+2 - #8289 It has one fan, original from the factory, mounted on the pass side. It has a mounting plate for the driver side, but no fan installed. I assume this was original as planned. The car is w/...