Search found 155 matches
- Tue Apr 12, 2022 4:34 am
- Forum: Vintage Ferraris
- Topic: Elektro Board
- Replies: 4
- Views: 4271
Re: Elektro Board
Forgot to mention - it is the electro board of a 250 GTE
- Tue Apr 12, 2022 4:26 am
- Forum: Vintage Ferraris
- Topic: Elektro Board
- Replies: 4
- Views: 4271
Elektro Board
Hi there, I want to produce a new board for my electric box. It seems that some of the holes were made throughout the years and I hardly know what the original template should look like.
Does anybody have a good picture of an untouched board which I could use as a template?
Regards,
Martin
Does anybody have a good picture of an untouched board which I could use as a template?
Regards,
Martin
- Thu Feb 24, 2022 2:25 am
- Forum: Vintage Ferraris
- Topic: Fan belt sleeve
- Replies: 32
- Views: 28447
Re: Fan belt sleeve
John, your picture shows the front page of the card box which was the same for all different sizes of Pirelli fan belts at that time. The interesting thing is the back side with the specific model number of the belt. In the meantime I learnt that the belt for the 250 GT has the measurements 9,5 x 94...
- Tue Feb 22, 2022 4:29 am
- Forum: Vintage Ferraris
- Topic: Fan belt sleeve
- Replies: 32
- Views: 28447
Re: Fan belt sleeve
The fan belt sleeve from Pirelli shows a number at the backside. The reproduction of Kilimanjaro says 60421, an original offered at FCP says 60250.
These numbers specify obviously the exact type of belt - does anybody know the correct number for the 250 GTE?
These numbers specify obviously the exact type of belt - does anybody know the correct number for the 250 GTE?
- Wed Feb 16, 2022 11:32 am
- Forum: Vintage Ferraris
- Topic: Spark plug wrench of 250 toolkit
- Replies: 8
- Views: 7228
Spark plug wrench of 250 toolkit
Hello, The spark plug wrench of the original toolkit from the 250 series varied in two different lengths - a long and a short version. I try to figure out which one would be the right model for my 250 GTE #3631. Chris mentioned, that the long version would not work at the outside plug engine models....
- Wed Jan 26, 2022 7:40 am
- Forum: Vintage Ferraris
- Topic: Valve Stem Protectors
- Replies: 5
- Views: 2947
Re: Valve Stem Protectors
Thank you John,
I understand that the original stem would not match todays inner tubes / valve outlets due to different measurements. Did you note the final measurements that you machined?
Regards,
Martin
I understand that the original stem would not match todays inner tubes / valve outlets due to different measurements. Did you note the final measurements that you machined?
Regards,
Martin
- Mon Jan 24, 2022 9:26 am
- Forum: Vintage Ferraris
- Topic: Valve Stem Protectors
- Replies: 5
- Views: 2947
Valve Stem Protectors
Hello, Does anybody have the original valve stem protectors of the Borrani wheels? I need an expressive foto and drawing with the measurements to machine these. Also the kind of plating is of my interest - ate these cadmium plated or chromed? Can anybody help please? Thank you and best regards, Martin
- Fri Jan 21, 2022 9:50 am
- Forum: Vintage Ferraris
- Topic: 2 alloy tubes under the oil filler plug?!
- Replies: 10
- Views: 7924
Re: 2 alloy tubes under the oil filler plug?!
Hello John, thank you for this information. Why did you remove these tubes? And to all others: is it possible that some GTE‘s have been equipped like this or is it definitely a later post delivery conversion of one of the pre-owners? The filler cap does have the two connecting branches at the bottom...
- Thu Jan 20, 2022 7:31 am
- Forum: Vintage Ferraris
- Topic: 2 alloy tubes under the oil filler plug?!
- Replies: 10
- Views: 7924
2 alloy tubes under the oil filler plug?!
Hello, Yesterday I was with some experts for classic Ferraris and they said that they never saw 2 alloy tubes going down from the oil filler plug but just one thicker alloy tube and a thinner hose. I am very sure that these thinner alloy tubes my series II 250 GTE has are original. Both, the thicker...
- Wed Dec 22, 2021 7:58 am
- Forum: Vintage Ferraris
- Topic: Progress on Brakes
- Replies: 43
- Views: 31593
Re: Progress on Brakes
Cicognani, not Ruthlands - sorry.
Maybe I am too stupid but I can’t find a way to edit my previous posts here so all mistakes are safed forever….
Maybe I am too stupid but I can’t find a way to edit my previous posts here so all mistakes are safed forever….
- Wed Dec 22, 2021 7:55 am
- Forum: Vintage Ferraris
- Topic: Progress on Brakes
- Replies: 43
- Views: 31593
Re: Progress on Brakes
Thank you Chris and John! I made a typing error, the diameter of my piston is 16mm - see picture. What I do not understand is the previous post of Mike from 4th of May 2010: I will happily submit to any flaming if I am wrong but I think the 3mm rod is designed to generate a bit of pull back on the ...
- Wed Dec 22, 2021 7:50 am
- Forum: Vintage Ferraris
- Topic: Progress on Brakes
- Replies: 43
- Views: 31593
Re: Progress on Brakes
Thank you Chris and John! I made a typing error, the diameter of my piston is 16mm - see picture. What I do not understand is the previous post of Mike from 4th of May 2010: I will happily submit to any flaming if I am wrong but I think the 3mm rod is designed to generate a bit of pull back on the p...
- Tue Dec 21, 2021 4:13 pm
- Forum: Vintage Ferraris
- Topic: Progress on Brakes
- Replies: 43
- Views: 31593
Re: Progress on Brakes
Hi, I am restoring this brake booster right now and was able to dissemble the unit properly. I will have a new piston machined from stainless steel and will replace the bushing in the booster housing as both show little corrosion and it is my understanding that there should be as little play as poss...
- Thu Dec 16, 2021 4:02 am
- Forum: Vintage Ferraris
- Topic: Pedal box disassembly
- Replies: 10
- Views: 4189
Re: Pedal box disassembly
Thank you John and Kerry for your help! I checked my library again and found that I have the documents but did not look carefully enough at first sight. I understand that there is no special way to dissemble the pedal box. I do have the problem that the shaft cannot be removed. Do you think that pre...
- Thu Dec 16, 2021 3:50 am
- Forum: Vintage Ferraris
- Topic: Pedal box disassembly
- Replies: 10
- Views: 4189
Re: Pedal box disassembly
Thank you John and Kerry for your help!