Search found 4060 matches
- Sun Oct 22, 2023 7:58 am
- Forum: Vintage Ferraris
- Topic: Chrome plating
- Replies: 1
- Views: 1108
Re: Chrome plating
It's always a collaboration between me and the platers when replating parts. He does a good job about wrapping the threads, but we have to make sure they're wrapped even before the stripping when it comes to the threads. I've also had too much plating put on the locks where they won't slide back tog...
- Thu Sep 07, 2023 8:04 pm
- Forum: Vintage Ferraris
- Topic: 330GT SII dunlop caliper rebuild or replace
- Replies: 7
- Views: 7569
Re: 330GT SII dunlop caliper rebuild or replace
Make sure they're stainless. I thought they use brass sleeves...michaelbalk330 wrote: ↑Thu Sep 07, 2023 7:55 pm Also
Apparently Apple Hydraulics can rebuild them ( one stop shopping) too but I need to find out about their CAD plating..
Michael
Tom
- Wed Sep 06, 2023 9:14 pm
- Forum: Vintage Ferraris
- Topic: 330GT SII dunlop caliper rebuild or replace
- Replies: 7
- Views: 7569
Re: 330GT SII dunlop caliper rebuild or replace
Hi Michael, I've seen billet Stainless steel pistons used in place of the original dunlop pistons, and I would imagine they work the same as the original design with the lucas seals. The billet stainless pieces shouldn't corrode and will only need new seals if there is a problem. That being said, if...
- Sun Sep 03, 2023 1:56 pm
- Forum: Vintage Ferraris
- Topic: TY Party @ Greenspans
- Replies: 12
- Views: 9243
- Fri Sep 01, 2023 7:33 am
- Forum: Vintage Ferraris
- Topic: Ptoblems with seals for front and rear screens
- Replies: 5
- Views: 6757
Re: Ptoblems with seals for front and rear screens
Hi Martin, Everything changes through the years. If you had the chrome trim replated, there is always a chance that it can change in shape slightly through the polishing process. I think the Cicognani are extrusions, but the dies can change over time. The window opening can also affect the fit. Kerr...
- Fri Aug 25, 2023 5:45 pm
- Forum: Vintage Ferraris
- Topic: Borani Wheel Refurb
- Replies: 6
- Views: 6259
Re: Borani Wheel Refurb
Any metal polishing company can polish the rims, or you can do them yourself! Wear gloves and a mask!
Tom
Tom
- Wed Aug 23, 2023 8:16 pm
- Forum: Vintage Ferraris
- Topic: 330GTC radiator hoses
- Replies: 6
- Views: 6579
Re: 330GTC radiator hoses
I would agree with GT Car Parts in AZ, but that's only if he returns your calls! Bill, just like Geof at Partsource are one man or two men operations so they prioritize calls. T Rutlands has a few more people on staff, but not all of them are physically in the facility in Monterey or Wisconsin. You ...
- Mon Jul 31, 2023 6:48 am
- Forum: Vintage Ferraris
- Topic: Rear axle drop stop
- Replies: 8
- Views: 8973
Re: Rear axle drop stop
Kerry had the luxury of working on a SII 330 that has less leafs in the spring because his car has the additional coil springs to support the vehicle. Earlier cars like SI 250GTEs and early 250s have many more leafs for the rear spring putting a lot of tension on the shackle. I don't think it could ...
- Sun Jul 30, 2023 6:02 am
- Forum: Vintage Ferraris
- Topic: Rear axle drop stop
- Replies: 8
- Views: 8973
Re: Rear axle droop stop
I should add the length of these cables are very important, as the description states, they limit the drop of the rear axle when the rear axle becomes unsprung. The rear shackles can go over center if the axle is dropped too far: http://tomyang.net/wp-content/uploads/2022/04/4151_60.jpg Here's a pic...
- Thu Jul 27, 2023 3:42 pm
- Forum: Vintage Ferraris
- Topic: Ferrari 365 GTC/4 Rear suspension self levelling
- Replies: 1
- Views: 4605
Re: Ferrari 365 GTC/4 Rear suspension self levelling
Hi Chris, Chances are the load levelers have failed. I can't recall if the original load levelers had a schrader valve on the top as you pictured, but I'm pretty sure if you try to add air, it may be more air pressure than what you can add at home. I've heard so many stories about people rebuilding ...
- Sat Jul 22, 2023 6:31 am
- Forum: Vintage Ferraris
- Topic: Tips & Tricks for the paintjob
- Replies: 3
- Views: 5656
Re: Tips & Tricks for the paintjob
also, the underside of the hood is painted semigloss black, but is closer to mat than gloss. That holds true for much of the semigloss black on the car.
Tom
Tom
- Thu Jul 20, 2023 10:45 pm
- Forum: Vintage Ferraris
- Topic: Tips & Tricks for the paintjob
- Replies: 3
- Views: 5656
Re: Tips & Tricks for the paintjob
Semi gloss black on the inside of the trunk too. Inside of the fuel filler door is body color.
Tom
Tom
- Fri Jun 23, 2023 5:54 pm
- Forum: Vintage Ferraris
- Topic: Who repairs Vegilia clocks; have one for sale?
- Replies: 11
- Views: 9491
Re: Who repairs Vegilia clocks; have one for sale?
George is looking for a clock to fit in a 330GTC, Cornelis' clock is for 250 cars and won't fit the 330GTC. The GTC has a chrome ring and plastic hood. They came in 330GT 2+2s as well.
Tom
Tom
- Thu Jun 15, 2023 4:07 pm
- Forum: Vintage Ferraris
- Topic: Walt Merlin’s auction
- Replies: 2
- Views: 4534
Re: Walt Merlin’s auction
I met Walter Medlin years ago and it's a good story. The stories about his collection of cars in Orlando and how the hurricane blew the roof off his building exposing his secret collection was legend, and I wanted to meet him in person. His brother was in touch with me through the website and shared...
- Sat May 27, 2023 10:05 am
- Forum: Vintage Ferraris
- Topic: 365 GT 2 + 2 restoration
- Replies: 476
- Views: 488328
Re: 365 GT 2 + 2 restoration
I can't wait to hear about your experience with your car! Congratulations!
Tom
Tom