Looking to see whats available to purchase -
Need a 58 Ferrari 250 Ellena radiator.
Looking for a very nice used example to purchase.
As a ref point, the 250 Ellena Rad has the temp sensor for the louvers mounted on the front, has a bracket
in the middle on the upper tank - engine side for the rod that goes to the engine to support the radiator.
The filler neck is extended out from the top tank and it has a sensor on the top tank driver side as well.
I'll look the pic of the correct one hoping someone has one available .
Appreciate any leads
Ferrari 250 Radiator
Ferrari 250 Radiator
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Ferrari 250 Radiator
Hi Ed, if none turns up, you might retrofit a PF coupe radiator.
john
john
PF Coupe
Re: Ferrari 250 Radiator
Ed the very early PF´s did use the same radiator as Ellena and Boano even with louvre system , roll blind came laterJohn Vardanian wrote:Hi Ed, if none turns up, you might retrofit a PF coupe radiator.
john
Here some pics of what you need.
C.
- Attachments
-
- IMG_1221.jpg (45.91 KiB) Viewed 7144 times
-
- IMG_1231.jpg (39.47 KiB) Viewed 7144 times
-
- IMG_1223.jpg (46.35 KiB) Viewed 7144 times
Re: Ferrari 250 Radiator
Cornelius picture is correct for what i need.......
I did buy one complete radiator recently, but upon the disassembly of it we did notice that the
upper and lower tanks were very very stretch. It seem to me that there might have been water in the
tank and it froze and expanded it causing the distortion. several of the areas where the tank was to be indented along the top
and bottom of the tanks was pushed out and rounded off as well as the seams are split.
It might be repairable, but many hours to fix it plus a new core is required as well.....so for right now
i need to search out for a very nice orig one that at least would need a new core and i should be good to go.
Im working a plan on the louvers to find one or ill make one if i can find a good example to copy....
Final solution -i have talked to GTO engineering then can make a new radiator - they are now making them for the boano currently.
Im waiting for pictures for their rad (they own the molds and drawings to the FIM radiators) .....
I did buy one complete radiator recently, but upon the disassembly of it we did notice that the
upper and lower tanks were very very stretch. It seem to me that there might have been water in the
tank and it froze and expanded it causing the distortion. several of the areas where the tank was to be indented along the top
and bottom of the tanks was pushed out and rounded off as well as the seams are split.
It might be repairable, but many hours to fix it plus a new core is required as well.....so for right now
i need to search out for a very nice orig one that at least would need a new core and i should be good to go.
Im working a plan on the louvers to find one or ill make one if i can find a good example to copy....
Final solution -i have talked to GTO engineering then can make a new radiator - they are now making them for the boano currently.
Im waiting for pictures for their rad (they own the molds and drawings to the FIM radiators) .....
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
Re: Ferrari 250 Radiator
purchased one with the correct louver as well - - thanks for the advise
ill need to get it recored, zac, will give u call ref your guy in CA
ill need to get it recored, zac, will give u call ref your guy in CA
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
Re: Ferrari 250 Radiator
Hello Ed,
Congrats on the find
Santa Monica Radiator is who I use
Zac
Congrats on the find
Santa Monica Radiator is who I use
Zac
1970 365 gt 2+2 13137, 1997 550 Maranello, 1969 Lamborghini Miura S, 1973 365 GTB/4 Daytona
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Ferrari 250 Radiator
Thank you John and Zac.....yes very fortunate to acquire this part.
The parts search for the major parts is coming to a close - thank god!!
I need to update the tread on the other site with the progress - lots of stuff happening on all fronts with the car!
The parts search for the major parts is coming to a close - thank god!!
I need to update the tread on the other site with the progress - lots of stuff happening on all fronts with the car!
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS