Looking for a set of 330 GTC door sill plates and the sun visor end tips in white.
Any leads would be appreciated....
GTC parts
Re: GTC parts
I made visor ends a while ago. See http://www.parrotbyte.com/kbc/ferrari/VisorEnds.htm for the details. Small Parts is out of business now, but looking at McMaster-Carr, http://www.mcmaster.com/#94639A356, 5/8 long by 5/16 (.312) OD by .192 ID seems to be a better starting point if the GTC visors are the same as the 2+2. These should only need to drilled to the proper ID. That's not too easy given that the wall thickness ends up only 1/32".enio45 wrote:Looking for a set of 330 GTC door sill plates and the sun visor end tips in white.
Any leads would be appreciated....
Regards, Kerry
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
Re: GTC parts
Greetings… Curious-mine appear to be some sort of white fabric tubing coated with plastic. Possibly due to it being an early car. Do we have a source for rebuilding the visors as the foam in mine has perished.
Tim
Tim
1964 330GT 5769 -the big yellow taxi 61&66 Morgan +4's Daimler SP250 Turner 950S and some other dull stuff plus a brand Mercedes C300 4matic
Re: GTC parts - update
Looking for the following GTC parts
1. Door Sill Plates
2. Front license bracket
3. Acorn nuts for rear tail lamp covers
4. Set of white visor end caps on the visor rods - most likely will make per Kerry's suggestion
1. Door Sill Plates
2. Front license bracket
3. Acorn nuts for rear tail lamp covers
4. Set of white visor end caps on the visor rods - most likely will make per Kerry's suggestion
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS