Original timing mark camshaft

Moderators: 330GT, abrent

Post Reply
chris
Posts: 219
Joined: Sat Mar 02, 2013 7:52 am

Original timing mark camshaft

Post by chris »

Hi All, hi Tom,

my camshafts are marked in two different ways. See picture. One mark is a punch (right in picture) the other a fine line (left in picture). On one camshaft both marks are at the same place, at the other they differ. I guess the thin line is the original factory mark, the punch from a latter timing correction of a workshop. Right? Is the line on the camshaft direct beside the arrow on the valve roller cap the factory mark?

Thanks
Christopher

PS.: clear that I will only use them for basic setting and check/ adjust correct timing afterwards.
Attachments
3D359F62-EE77-48E0-AF87-18CB77CA84C0.png
User avatar
tyang
Posts: 4060
Joined: Wed Nov 27, 2002 10:28 pm
Location: New York
Contact:

Re: Original timing mark camshaft

Post by tyang »

Hi Chris,

The line next to the arrow is where the factory put its timing mark. The dot is someone else's mark.

Tom
'63 330 America #5053
chris
Posts: 219
Joined: Sat Mar 02, 2013 7:52 am

Re: Original timing mark camshaft

Post by chris »

Thanks!
Post Reply