Hello
as earlier mentioned i am changing wheelbearings - i have problems in getting the right size for rear - and now also today i received
from Superformance the front inner wheel bearings - my car is a ser 2 and the inner bearings are 32x65x25 mm and Superformance have sent
32x65x20 mm - so 5 mm narrover -
is it any good to make a spacer or should i try to have some made in the right size - seems difficult - or any suggestions
Kim
more bearings problems
Re: more bearings problems
Hi Kim,
Are you based in the UK, and ordering from Superformance? Most of my suppliers are in the States, but I also deal a lot with Maranello Parts in London. They are good at measuring parts and making sure you get what you need, not what will just do.
Tom
Are you based in the UK, and ordering from Superformance? Most of my suppliers are in the States, but I also deal a lot with Maranello Parts in London. They are good at measuring parts and making sure you get what you need, not what will just do.
Tom
'63 330 America #5053
Re: more bearings problems
if I can read right Tom........,
it seams that that 330 stays in Denmark due to his name not UK .
His name is 330 in denmark (330indenmark).
best
C.
it seams that that 330 stays in Denmark due to his name not UK .
His name is 330 in denmark (330indenmark).
best
C.
Re: more bearings problems
Hi Cornelis,
Thanks for your deductive reasoning! If I paid closer attention, I could be a lot smarter!
Tom
'63 330 America #5053
-
- Posts: 91
- Joined: Fri Apr 25, 2008 4:10 pm
- Location: Germany, Stuttgart Area
Re: more bearings problems
Dear Denmark-330-owner,
I ordered the 32x65x25 7 years ago at Peters Bearings Germany. Not cheap but availible. Company still in business.
Regards from Germany
I ordered the 32x65x25 7 years ago at Peters Bearings Germany. Not cheap but availible. Company still in business.
Regards from Germany
[b]Suebian330
#8741 330 GT2+2[/b]
#8741 330 GT2+2[/b]