I posted this to FerrariChat but thought I’d try here as well. having looked at Moss Motors, I honestly do think these oil coolers are the same as used on MGB’s. Can anyone verify that? I’m going to try to find a part number somewhere on mine. Any help appreciated.
“One of my Coventry/Mocal oil coolers appears to be leaking (not from the pipe fittings themselves). Is there a source for these little coolers? I haven’t checked with any suppliers yet, thought I’d ask here first in case anyone knows of a source. I have no idea if these can be re-cored like water radiators? Certainly there’s more pressure in the oil coolers that a normal water radiator. I have heard that these same coolers were used on MGB’s at some point (?), so I may look at Moss Motors.
I suppose I could use this as an excuse to re-plumb the car with a later system where the oil cooler was integrated into the bottom of the radiator, but what’s the fun of that? Besides, I can’t imagine that would be anything other than prohibitively expensive.
Anyone have any experience with these little coolers?”
Thanks,
Kevin
330 GTC twin oil coolers
-
- Posts: 44
- Joined: Tue Aug 03, 2021 3:40 pm
- Location: Maryland, USA
330 GTC twin oil coolers
1967 330 GTC s/n 9911
Re: 330 GTC twin oil coolers
kevin, call me - I've been down this route - 480-208-8259
ed montini
ed montini
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
-
- Posts: 44
- Joined: Tue Aug 03, 2021 3:40 pm
- Location: Maryland, USA