Hello, the bottom of my glove box has been replaced with card board and I need to recreate it from alloy as it was originally. Can anybody send pictures please which show how it should look like - especially at the edges? And was it covered with trim on the underside or shall it be left raw alloy there?
Thank you and best regards,
Martin
Glove box repair
Re: Glove box repair
Hi Martin, here is my original glovebox from a Series 1(2677). The outside aluminum was covered in what looks like a black wool material. It still has he Pininfarina body number written in chalk. Below are the pictures. Let me know if you want any more details.
Dave
Dave
Re: Glove box repair
Here are the last 2 pictures of the cloth. Please PM me if you want the full size pictures emailed to you.
Dave
Dave
Re: Glove box repair
Hello Dave,
thank you for your beneficiual pictures. I have sent you a pm but could not attach pictures, so I post these here.
Best regards, Martin
thank you for your beneficiual pictures. I have sent you a pm but could not attach pictures, so I post these here.
Best regards, Martin
250 GTE #3631 (series Ii)