250 cylinder head pulling tool

Jimmyr · Post by **Jimmyr** » Wed Sep 22, 2004 9:33 am

Some of the old FAF catalogs had a plueprint of a head pulling plate, with dimentions. Many times some of the parts dealers or repair shops will lend you their puller. Jim Riff

David Booth · Post by **David Booth** » Wed Sep 22, 2004 11:36 am

I made mine from the dims in the old FAF catalogs Jim is referencing. Works perfectly, too. I'll be glad to get that info to you.

Post by **tyang** » Wed Sep 22, 2004 10:52 pm

Hi Guys,

Parker Hall sent me this photo:

Go to http://www.tomyang.net/cars/ferrari.html?headpuller.htm for the details.

Tom

Chris Coios · Post by **Chris Coios** » Fri Sep 24, 2004 5:44 pm

Tom,

The sketch Parker sent along (thank you Parker!) is from an old Ferrari Club of America News Bulletin tech tip. I remember that it originated from John Hajduk, who had a shop in the Chicago area at least into the early 1980's and later, I think Indiana (?).

Chris

Chris Coios · Post by **Chris Coios** » Fri Sep 24, 2004 5:46 pm

Sorry Tom, I opened your link after my post to see you have the full story on that sketch! Chris