getting the drivers door off
Posted: Sat Aug 03, 2002 1:47 am
Posted by andrew brent
Hi,
It seems that the hinge pins are frozen in the hinges. I took out the split pins, at either end of the pins but the pin's themselves won't move. Anyone care to comment on what to do other than hit them with a larger hammer. Oh, I assume top pin goes out via down and bottom pin comes out via up.
It's a Series II GTE.
Regards,
Andrew.
Hi,
It seems that the hinge pins are frozen in the hinges. I took out the split pins, at either end of the pins but the pin's themselves won't move. Anyone care to comment on what to do other than hit them with a larger hammer. Oh, I assume top pin goes out via down and bottom pin comes out via up.
It's a Series II GTE.
Regards,
Andrew.