Hose Help
Posted: Fri Aug 09, 2002 10:20 am
Posted by Todd
Hi again,
Just in case someone is interested in using modern Earls, Russel, etc. hose on the oil system. I FINALLY located Aeroquip adapters at a local machine shop/hydraulic shop that take the place of the factory adapters that go into the oil ports in the various assemblies (M22 x 1.5P). This will allow me to use stainless braid hose and easily obtainable ends. I know that it is NOT original or Concours, but if you are working on getting a good driver in shape, this might be useful.
Hi again,
Just in case someone is interested in using modern Earls, Russel, etc. hose on the oil system. I FINALLY located Aeroquip adapters at a local machine shop/hydraulic shop that take the place of the factory adapters that go into the oil ports in the various assemblies (M22 x 1.5P). This will allow me to use stainless braid hose and easily obtainable ends. I know that it is NOT original or Concours, but if you are working on getting a good driver in shape, this might be useful.