Hello!
I am looking for 2 restorable KONI rear shocks for my 250GTE 3905GT without coil spring around the shock.
Thanks
Hein
250 gte rear shocks
Re: 250 gte rear shocks
Hein wrote:Hello!
I am looking for 2 restorable KONI rear shocks for my 250GTE 3905GT without coil spring around the shock.
Thanks
Hein
Hein,
Why do you not look at youre own webside ?
http://www.heinbrand.com/de/index.php
Seems they are new in Stock!
See below.
Funny.
C.
- Attachments
-
- In stock
- fer_foto_stossdaempfer06.jpg (179.08 KiB) Viewed 8400 times
Re: 250 gte rear shocks
I had some... I gave them to a customer...... I never got them back......
Hein
Hein
Re: 250 gte rear shocks
No good deed goes unpunished!Hein wrote:I had some... I gave them to a customer...... I never got them back......
Hein
Tom
'63 330 America #5053
-
- Posts: 86
- Joined: Wed Jan 29, 2003 10:39 pm
Re: 250 gte rear shocks
I have a dozen Koni shocks, some of them already restored. What is the model number for the 250 GTE?for?
Re: 250 gte rear shocks
They should be KONI 82H-1217.
Thanks
Hein
Thanks
Hein
-
- Posts: 86
- Joined: Wed Jan 29, 2003 10:39 pm
Re: 250 gte rear shocks
Hein,
The closes I have to those are a 82H 1216 and a 82H 1216S. Not sure if that helps or not
The closes I have to those are a 82H 1216 and a 82H 1216S. Not sure if that helps or not
Re: 250 gte rear shocks
Greg Brendel wrote:I have a dozen Koni shocks, some of them already restored. What is the model number for the 250 GTE?for?
Hi!
I need also rear shocks to GTE series III, WITH spring around the shock.
If I am correct the model must be 82-1322
Greg, do you have these shocks?
Regards
Martin
1963 GTE series III
Re: 250 gte rear shocks
Working with a pair of Koni 82-1322 off of a 330 GT 2+2. I'm trying to determine what the correct shock bushings should be. These shocks have a 28mm eyelet. The bushings that are listed for these shocks (94678) are 27mm in o.d. So, either someone as bored the ends of these shocks in some hack attempt to make an off the shelf bushing fit or I have the incorrect part number. Oddly, the eyelet bushing I extracted has no outer metal collar; just hard rubber with a sleeve for the bolt.
Thanks...
Thanks...