Bumper insulators
Re: Bumper insulators
All the brackets are different but look roughly the same as the one above. The vary in length of flat stock to match up with the mounting studs on the bumpers.
Tom
'63 330 America #5053
Re: Bumper insulators
Thanks Tom, the 2 that fit are half that size . I can make a couple more using the ones I have .
They all came with the car but not on it ,, so 2 are not for this car.
They all came with the car but not on it ,, so 2 are not for this car.
Re: Bumper insulators
Hi Rob,
I think the short ones go in the front of the car.
Tom
I think the short ones go in the front of the car.
Tom
'63 330 America #5053
Re: Bumper insulators
I managed to fabricate 2 more from what I had.
Thanks for your help. We prefitted everything and they work good.
Bumpers are being rechromed.
Thanks for your help. We prefitted everything and they work good.
Bumpers are being rechromed.
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Bumper insulators
While we are on the subject, what is the factory finish on these brackets? And then, were the Pininfarina cars finished the same as the Scaglietti? Thanks.
john
john
PF Coupe