An intro to say hi.

Moderators: 330GT, abrent

Scott uk
Posts: 7
Joined: Wed Aug 31, 2016 11:53 am

Re: An intro to say hi.

Post by Scott uk »

I am the same as tom and run all my engines with protruding liners, I mearly do this to keep the engine stock and believe you can get a better seal with the liners like that. As for running the Elring I would not like to say if they would work or not on a decked block.
Keeper of
330gt 2+2 series 1 and 2
330 gtc
365gtc4
365gtb daytona
512bb
348 gtc
NOTRED
Posts: 40
Joined: Mon Nov 21, 2016 11:15 pm

Re: An intro to say hi.

Post by NOTRED »

Hi everyone this is my first post. GTE sn#2831 owned since 1981 - original Len Miller GTE Register member
I too, made a mistake using the elring head gasket with the stock protrusion. I want to keep the protrusion and use another gasket. Please help!
Campbell
Scott uk
Posts: 7
Joined: Wed Aug 31, 2016 11:53 am

Re: An intro to say hi.

Post by Scott uk »

Hi noted, sorry it has taken so long to reply as I have been doing some late nights getting our gtc ready for a full repaint. The gasket that I use with the stock protrusions are from Geoffrey ohland at parts source. if you speak to him and tell what you are needing and he can sort you out. I also use a copper gasket dressing just to ensure the best possible result as stripping these engines is not something you want to be doing to frequently. Hope this helps. Scott
Keeper of
330gt 2+2 series 1 and 2
330 gtc
365gtc4
365gtb daytona
512bb
348 gtc
Post Reply