Bumper insulators

Moderators: 330GT, abrent

User avatar
tyang
Posts: 4060
Joined: Wed Nov 27, 2002 10:28 pm
Location: New York
Contact:

Re: Bumper insulators

Post by tyang »

brktbfo.jpg
brktbfo.jpg (174.39 KiB) Viewed 5049 times
Hi Rob,

All the brackets are different but look roughly the same as the one above. The vary in length of flat stock to match up with the mounting studs on the bumpers.

Tom
'63 330 America #5053
Rob330
Posts: 74
Joined: Thu Dec 26, 2013 9:43 am

Re: Bumper insulators

Post by Rob330 »

Thanks Tom, the 2 that fit are half that size . I can make a couple more using the ones I have .

They all came with the car but not on it ,, so 2 are not for this car.
User avatar
tyang
Posts: 4060
Joined: Wed Nov 27, 2002 10:28 pm
Location: New York
Contact:

Re: Bumper insulators

Post by tyang »

Hi Rob,

I think the short ones go in the front of the car.

Tom
'63 330 America #5053
Rob330
Posts: 74
Joined: Thu Dec 26, 2013 9:43 am

Re: Bumper insulators

Post by Rob330 »

I managed to fabricate 2 more from what I had.
Thanks for your help. We prefitted everything and they work good.
Bumpers are being rechromed.
John Vardanian
Posts: 1906
Joined: Wed Sep 04, 2002 12:13 am
Location: San Francisco Area

Re: Bumper insulators

Post by John Vardanian »

While we are on the subject, what is the factory finish on these brackets? And then, were the Pininfarina cars finished the same as the Scaglietti? Thanks.

john
PF Coupe
Post Reply