I have already posted this on FerrariChat with no responses. So I thought that I would try here too.
I have a 1966 Ferrari 330GT, whose clutch throwout bearing must be replaced. It is a single row ball bearing.
Ferrari Technical Letter #62 of Feb. 28, 1967 states that this bearing should be S.K.F. 1812.107.000
In searching the web, it appears that this bearing is no longer manufactured.
Anyone know of a correct replacement?
While I am at it, any recommendations for new clutch discs and pressure plates?
I have heard that some of the re-manufactured items require a much larger clutch pedal force.
330GT clutch
330GT clutch
Lowell Brown
1966 Gold 330 2+2 Series II
1966 Gold 330 2+2 Series II
-
- Posts: 49
- Joined: Wed Jun 06, 2012 4:30 pm
- Location: SW FL
Re: 330GT clutch
maybe this website will be of some assistance > https://www.eurospares.co.uk/parts/ferr ... ion-pedals
Re: 330GT clutch
Hello LowellLowell wrote: ↑Sat Dec 08, 2018 2:19 pm I have already posted this on FerrariChat with no responses. So I thought that I would try here too.
I have a 1966 Ferrari 330GT, whose clutch throwout bearing must be replaced. It is a single row ball bearing.
Ferrari Technical Letter #62 of Feb. 28, 1967 states that this bearing should be S.K.F. 1812.107.000
In searching the web, it appears that this bearing is no longer manufactured.
Anyone know of a correct replacement?
While I am at it, any recommendations for new clutch discs and pressure plates?
I have heard that some of the re-manufactured items require a much larger clutch pedal force.
I bought over the years at least 5-6 complete Clutch assambles AS T.Rutlands sells them.
I bought them from an other provider, but identical as on foto below. Don´t remember the name right now,
They are diaphragma clutchs in stead of the org Ferrari 3 fingerclutch and works perfct for late 250PF serie 2 and 275GTB
I think it should work also for early 330gt with overdrive.
I dont know you type so check at him !
its all complete with throwout bearing and clutch pate.
you need less pedalpressure as on the 3 finger once.
I can recommend him .
they are manufacted in Germany.
but could not find out where.
low cots of around 1000 USD.
hope this is helpfull.
regards
C.
Re: 330GT clutch
Hi Lowell,
How hard is your pedal pressure now? SII cars have very stiff clutches to begin with!
Tom
How hard is your pedal pressure now? SII cars have very stiff clutches to begin with!
Tom
'63 330 America #5053
Re: 330GT clutch
Clutch pedal force has never been very large on my Series II car.
This is a late Series II with two engine mounts --- the engine is essentially a GTC engine.
The engine forms a unit with the transmission. The transmission has only one mounting at the rear.
Kerry tells me that this is the transmission used on the later 365 2+2.
This is a late Series II with two engine mounts --- the engine is essentially a GTC engine.
The engine forms a unit with the transmission. The transmission has only one mounting at the rear.
Kerry tells me that this is the transmission used on the later 365 2+2.
Lowell Brown
1966 Gold 330 2+2 Series II
1966 Gold 330 2+2 Series II
Re: 330GT clutch
Here is a photo of my clutch pressure plate and throwout bearing. Could it be for a 365GT 2+2?
Lowell Brown
1966 Gold 330 2+2 Series II
1966 Gold 330 2+2 Series II
Re: 330GT clutch
Hi Lowell,
I guess the best way is to check part numbers, but the SII 330 has the same transmission as the 365GT 2+2, so the clutches could very possibly be the same.
Have you called the usual suspects for Ferrari parts, and seen if they have a replacement part?
Tom
I guess the best way is to check part numbers, but the SII 330 has the same transmission as the 365GT 2+2, so the clutches could very possibly be the same.
Have you called the usual suspects for Ferrari parts, and seen if they have a replacement part?
Tom
'63 330 America #5053
Re: 330GT clutch
Kerry says that although the late SII with two engine mounts (an only the two mount engines)tyang wrote: ↑Sat Dec 15, 2018 8:43 am Hi Lowell,
I guess the best way is to check part numbers, but the SII 330 has the same transmission as the 365GT 2+2, so the clutches could very possibly be the same.
Have you called the usual suspects for Ferrari parts, and seen if they have a replacement part?
Tom
have the 365GT transmission, they do not share any of the clutch parts.
Perhaps the best way is to have the old parts rebuilt. Any comments?
Lowell Brown
1966 Gold 330 2+2 Series II
1966 Gold 330 2+2 Series II