Carpet in boot of 250 Gte

Moderators: 330GT, abrent

Post Reply
chris
Posts: 219
Joined: Sat Mar 02, 2013 7:52 am

Carpet in boot of 250 Gte

Post by chris »

Hi All,

any photos on how the original carpet looks like for a 250Gte S2/3 in the boot below the aluminum panel covering the spare wheel would help a lot. Especially around the two longitudinal frame tubes, inside the rear fender panels, etc.

Thanks a lot.

Christopher
User avatar
tyang
Posts: 4060
Joined: Wed Nov 27, 2002 10:28 pm
Location: New York
Contact:

Re: Carpet in boot of 250 Gte

Post by tyang »

Hi Chris
2259_45.jpg
2259_45.jpg (125.45 KiB) Viewed 4572 times
Although this is from a SI 250GTE, it's similar to how the SIII Trunk is trimmed. There are few cut pieces of carpeting with binding that finish the bottom of the wells in each corner. Unfinished pieces are glued to the inside of the fenders. The carpet that covers the aluminum spare tire cover has binding all the way around and four snaps to secure it to the panel.

Let me know if this helps.

Tom
'63 330 America #5053
chris
Posts: 219
Joined: Sat Mar 02, 2013 7:52 am

Re: Carpet in boot of 250 Gte

Post by chris »

Thanks Tom.
Post Reply