Hi All,
does someone have the front Belt dimensions for 250 Gte engine S3? Mine has the latter generator like the 330 America.
Thanks
Christopher
Belt dimensions for 250 Gte engine S3?
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Belt dimensions for 250 Gte engine S3?
I got a replica "correct Pirelli" belt from Parker Hall. It's for the earlier 3.0L motor with generator. It measures 95cm long on the outer surface. I couldn't use it because my car has an alternator.
john
john
PF Coupe
Re: Belt dimensions for 250 Gte engine S3?
Hi John,
so your car is the same as mine with the alternator as used in the 330 S1. Di you know the belt dimensions you use?
Thanks
Christopher
so your car is the same as mine with the alternator as used in the 330 S1. Di you know the belt dimensions you use?
Thanks
Christopher
Re: Belt dimensions for 250 Gte engine S3?
Hi Christopher,
I always measure the belt or take a piece of string to the parts store to get the right belt when I don't have a number. With different pulley sizes one car can differ from the next.
Good luck!
Tom
I always measure the belt or take a piece of string to the parts store to get the right belt when I don't have a number. With different pulley sizes one car can differ from the next.
Good luck!
Tom
'63 330 America #5053
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Belt dimensions for 250 Gte engine S3?
Chris, I was using a NAPA belt with this number: 25-09783/7385. If you need the length I can measure it.
john
john
PF Coupe
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Belt dimensions for 250 Gte engine S3?
If that NAPA item works and you prefer a more "appropriate" Pirelli, here's the correct one. The NAPA one is toothed, while the Pirelli one is pricier.
john
john
PF Coupe