Hello
I am installing a new AC system in my 1968 365gt2+2 that was missing when I brought the car (new brackets and york compressor) but the 2 belts I have (925MM) are too long. I am wondering if these belts are correct or if the pulley is not too small (it came from an ISO and its diameter is 155mm). Does anyone know the exact diameter of the AC pulley?
Thanks a lot
Laurent
365gt AC compressor pulley
- michaelbalk330
- Posts: 130
- Joined: Fri Feb 06, 2015 8:28 am
Re: 365gt AC compressor pulley
I can measure mine later but i would think the pulley is designed to work with the compressor ( from a RPM standpoint) , as the compressor is rated for certain RPM
Michael
1967 330GT #9693
1960 190SL
1967 Ducati 350 Sebring #04783
1959 Moto Guzzi Galletto #GNR93
1973 450SL
1988 Mercedes 300CE 5 spd
1967 330GT #9693
1960 190SL
1967 Ducati 350 Sebring #04783
1959 Moto Guzzi Galletto #GNR93
1973 450SL
1988 Mercedes 300CE 5 spd
-
- Posts: 5
- Joined: Wed Nov 18, 2020 12:33 pm
Re: 365gt AC compressor pulley
Thank you, I finally decided to make new brackets to support the Ac unit and shortening the belts. Tedious work though….
Thanks
Laurent
Thanks
Laurent
Re: 365gt AC compressor pulley
Hi Laurent,
I have a 365 currently at my shop and the pulley roughly measures 160mm outside diameter. This is by no means accurate as I did it with a ruler.
Tom
I have a 365 currently at my shop and the pulley roughly measures 160mm outside diameter. This is by no means accurate as I did it with a ruler.
Tom
'63 330 America #5053
-
- Posts: 5
- Joined: Wed Nov 18, 2020 12:33 pm
Re: 365gt AC compressor pulley
Thank you Tom and happy new year to you. Obviously, you look busy which is great. Let me know when you are down in CT…