330 GT 2+2 Hood Pad Dimensions?

[csullivan67]

Does a hood pad for the 330 GT 2+2 fit a 330 GTC with or without trimming?  I was offered a hood pad for a 330 GT for sale, but need one for a GTC.  Dimensions of the GTC under hood attached.  Thanks in advance.

[JohnnyRay]

I can't help directly with the dimensions; however, I know that Mr. Fiat offers these. In checking, I find that they have two separate part numbers for each model, and the stitching locations are physically different when between them from the stock photos. I would guess "not compatible." Interestingly enough, the GTC part is significantly more expensive and has a higher shipping cost as well. Both seem expensive for what they are.

https://mrfiat.com/collections/glass-an ... c-hood-pad

https://mrfiat.com/collections/glass-an ... s-hood-pad

It would be nice to find a source for the uncut material so we could make our own from our existing pattern. Perhaps someone can make a suggestion?

BTW - I would like to source a replacement for my 330GT at some point. Let me know if you decide to pass on the one you found...

[chris]

Be careful to be sure that the material is not inflatable! There are some hood pads sold looking right but are made off highly inflatable material. Only buy from reputable sources and ask for proof.

BR
Christopher

[chris]

Should read inflamable! Do not know how it got edited…

[chris]

By the way Ed Montini is selling a 330 GT hood pad made by Lupi an fchat. You could ask Ed for dimensions.

[enio45]

Ed here - yes chris thanks for the notice

I have the 330 GT Hood Pad for sale - made by Luppi in italy -

Let me know if you interested - i did get dimensions for Chris, and mine will fit his hood - however i believe the
330 GT diamond pattern is smaller than the GTC. My diamond center diameter top to bottom is 5 3/5 and the sides
measure 3 3/4

Chris dimensions he provided are larger - i cannot confirm his info is correct - but i do know that mine are smaller than what he provided

My hood pad height is 35 1/4 width at top is 28 and width at bottom is 35 perfect for the 330 GT series II car -

let me know if interested - send me a PM or email

ED

[JohnnyRay]

Ed - are you suggesting that the Series II pad has different dimensions than the Series I item? And, is the GTC pad different than either of the GT pads? Does anyone truly know? More clarity would be helpful...

[tyang]

Ed - are you suggesting that the Series II pad has different dimensions than the Series I item? And, is the GTC pad different than either of the GT pads? Does anyone truly know? More clarity would be helpful...

The GTC hood pad is definitely different in dimension than the 330GT 2+2.

As far as making a cheaper alternative, I have seen many people try and failed to find the correct material. Like Chris said, it has to be flame retardant, but the shiny material is very hard to find. If someone on this forum wants to do the search, I would welcome the effort, but realize many have tried before! I'm sure the two shops that have found the correct material are going to keep their source close to the their chest. Good luck, and know I would be a buyer!

Tom

[JohnnyRay]

Thanks Tom. Would you believe the Series I and Series II to be the same fitment?

[tyang]

Thanks Tom. Would you believe the Series I and Series II to be the same fitment?

I have both hoods at my shop, so let me take a look when I get a chance.

Tom

[JohnnyRay]

For future reference, it would be great to compare these while you have access to both at the same time...

[enio45]

two things to consider - size and diamond pattern....let see what tom comes up with